AMD and NVIDIA GPUs IN SAME MINING RIG

As is typical, the name of this video is pretty self explanatory. Getting an AMD and an NVIDIA card to work together is actually a lot easier than some say it is. I do have some recommendations to make it a bit easier and ensure a higher success rate.

My key take aways

I prefer to start with the AMD drivers installed and the AMD card in the main PCIe lane
With ALL power off insert the new NVIDIA GPU
Secure the GPU to the case with a screw
Hook up the GPU power from the PSU
Install required driver
Check the memory type to understand how to adjust in afterburner
Open Miner, and Afterburner. Then start your benchmark. Only do one GPU at a time. In my case I turned off the AMD
After benchmark start miner and adjust Afterburner settings
Once your settings are good for NVIDIA card stop the miner. Ensure you click the startup button on Afterburner to save your settings
CLOSE afterburner (not just minimize), also close miner
Now set your AMD settings using Tweak Tool or AMD driver software. Once done keep this open or minimized
Activate all GPUs and get ready do mine
Ensure hash rate is where it should be. You might need to adjust settings

Good luck and have fun